Resources
Features & Benefits
Specifications
Unit | Width | Length |
---|---|---|
Roll | 5 ft. | 200 ft. |
<b>Tyvek® StuccoWrap™</b> exhibits the properties and characteristics indicated in the table below when tested as represented. Review all instructions and (Material) Safety Data Sheet ((M)SDS) before use. Please contact your local DuPont™ Tyvek Specialist before writing specifications around this product. Product properties are as follows:
TEST METHOD | TEST TITLE | PROPERTY | RESULTS |
---|---|---|---|
AIR | |||
ASTM E1677 | Standard Specification for Air Barrier (AB) Material or Assemblies for Low-Rise Framed Building Walls | Air Penetration Resistance | Type 1 cfm/ft2 |
ASTM E2178 | Standard Test Method for Determining Air Leakage Rate and Calculation of Air Permeance of Building Materials | Air Penetration Resistance | .004 cfm/ft2@ 1.57 psf |
TAPPI T460 | Air resistance of paper (Gurley method) | Air Penetration Resistance | >300 sec/100cc |
FIRE | |||
ASTM E84 | Standard Test Method for Surface Burning Characteristics of Building Materials | Surface Burning Characteristics Class A Index | Flame Spread = 5 Smoke Developed = 25 |
STRENGTH | |||
ASTM D882 | Standard Test Method for Tensile Properties of Thin Plastic Sheeting | Breaking Strength | 30/30 lbs/in |
ASTM D1117 | Standard Guide for Evaluating Nonwoven Fabrics | Tear Resistance | 7/9 lbs |
TAPPI T-410 | Grammage of Paper and Paperboard (Weight per Unit Area) | Basis Weight | 2.1 oz/yd2 |
WATER | |||
AATCC 127 | Test Method for Water Resistance: Hydrostatic Pressure | Water Penetration Resistance | 210 cm |
ASTM E2273 | Standard Test Method for Determining the Drainage Efficiency of Exterior Insulation and Finish Systems (EIFS) Clad Wall Assemblies | Drainage Efficiency ICC-ES AC 24 Section 6.11 ICC-ES AC 235 Section 4.5 | >98% Pass Pass |
ASTM E2556 | Standard Specification for Vapor Permeable Flexible Sheet Water-Resistive Barriers Intended for Mechanical Attachment | Vapor Permeability (Type II Compliant) | Pass |
ASTM E96 | Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials | Water Vapor Transmission Method A | 250 g/m236 perms |
ASTM E96 | Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials | Water Vapor Transmission Method B | 350 g/m250 perms |