DuPont™ Tile Bond™ Roof Tile Adhesive

One-Component, Minimal-Expanding Foam for Clay and Concrete Roof Tiles

tile-bond-roof-tile-adhesive-product-logo-image1.jpg
tile-bond-roof-tile-adhesive-product-logo-image2.jpg
tile-bond-roof-tile-adhesive-product-logo-image3.jpg

DuPont™ Tile Bond™ Roof Tile Adhesive

One-Component, Minimal-Expanding Foam for Clay and Concrete Roof Tiles

<br><b>DuPont™ Tile Bond™ Roof Tile Adhesive</b> is a portable one-component polyurethane foam adhesive for attaching concrete and clay roof tiles. Available in either a self-contained handheld aerosol can or a large canister, it is quicker and easier to install compared to traditional attachment methods such as screws, mortar, wire ties and clips. Minimal expanding <b>Tile Bond™</b> also provides greater attachment strength while minimizing nail penetrations and reducing roof weight loads. <br><br> <b>Tile Bond™</b>is designed for use with low/flat, medium, high and two-piece barrel profiles of roof tile when applied to a preapproved underlayment. With its easy-to-use dispensing equipment, <b>Tile Bond™ </b>can be quickly and efficiently dispensed in a highly consistent manner, eliminating the need for expensive equipment and ratio monitoring. It is an excellent choice for all new, reroof and specialty applications, including hip and ridge, rake and valley, and field and eave installations.
 
 
 
 
 
 

Features & Benefits 

 
 
 
 
 
 

Specifications

 
 
 

Standard Sizes

Unit Unit Size Units per Case Cases per Pallet Units per Pallet
Cylinder 23 lb 1 40 40
 
 
 

Testing

<b>DuPont™ Tile Bond™ Roof Tile Adhesive </b> exhibits physical properties as indicated in the table below when tested as represented. Review all instructions and (Material) Safety Data Sheet ((M)SDS) before use. Please contact DuPont at 1-866-583-2583 when additional guidance is required for writing specifications that include this product.

TEST METHOD TEST TITLE PROPERTY RESULTS
STRENGTH
ASTM D1621 Standard Test Method for Compressive Properties of Rigid Cellular Plastics Compressive Strength1 14.3 psi, min.
ASTM D1623 Standard Test Method for Tensile and Tensile Adhesion Properties of Rigid Cellular Plastics Tensile Strength 31.2 psi @ 180°F, 65% RH for 120 days,
concrete to concrete
ASTM D1622 Standard Test Method for Compressive Properties of Rigid Cellular Plastics Density 1.8 lb/ft3
WATER
ASTM E96 Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials Water Vapor Permeance2 3.0 perm, max
ASTM D2842 Test Method for Water Absorption of Rigid Cellular Plastics Water Absorption 2.2 % by volume, max.
GENERAL
ASTM D2856 Standard Test Method for Open-Cell Content of Rigid Cellular Plastics by the Air Pycnometer Closed Cell Content 0.86299999999999999

1Vertical compressive strength is measured at 10% deformation or at yield, whichever occurs first.

2Based on 1” thickness.

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

How can we help you?