DuPont™ Enerfoam™ Professional Foam Sealant

One-Component, Minimal-Expanding, Flexible Foam Sealant

DuPont™ Enerfoam™ Professional Foam Sealant

One-Component, Minimal-Expanding, Flexible Foam Sealant

<br><b>DuPont™ Enerfoam™ Professional Foam Sealant</b> is a one-component, minimal-expanding, flexible polyurethane foam used for adhering insulated concrete forms, architectural foam and drywall, and sealing cracks and voids such as pipe penetrations. The foam expands only enough to generate an effective seal, retaining elasticity as the structure expands and compresses. <br><br> <b>Enerfoam™</b> is designed to form a durable, airtight, water resistant bond to common building substrates such as wood, brick, concrete, foam board and most plastics. Its foam skin repels and deflects water, which can help reduce the potential for moisture damage to wood substrates. <br><br> In the U.S., <b>Enerfoam™</b> is also recognized as a fireblock, which means it resists the free passage of flames to other areas of the building through concealed spaces.
 
 
 
 
 
 

Features & Benefits 

 
 
 
 
 
 

Specifications

 
 
 

Standard Sizes

Unit Unit Size Units per Case Cases per Pallet Units per Pallet
Can 24oz can 12 64 768
Can 30oz can 12 64 768
 
 
 

Testing

<b>DuPont™ Enerfoam™ Professional Foam Sealant </b> exhibits physical properties as indicated inin the table below when tested as represented. Review all instructions and (Material) Safety Data Sheet ((M)SDS) before use. Please contact DuPont at 1-866-583-2583 when additional guidance is required for writing specifications that include this product.

TEST METHOD TEST TITLE PROPERTY RESULTS
THERMAL
ASTM C518 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus Thermal Resistance 0.26 per inch @ 75°F mean temp.,
Btu•in/ft2•hr•°F, min
ASTM D2126 Standard Test Method for Response of Rigid Cellular Plastics to Thermal and Humid Aging Dimensional Stability 14.31% (100°F/100%RH@2wks)
0.41% (-40°F/ambRH@2wks)
STRENGTH
ASTM C203 Standard Test Methods for Breaking Load and Flexural Properties of Block-Type Thermal Insulation Flexural Strength 8.8 psi min.
(parallel to rise)
ASTM D1621 Standard Test Method for Compressive Properties of Rigid Cellular Plastics Compressive Strength 9.3 psi
(parallel to rise)
ASTM D1623 Standard Test Method for Tensile and Tensile Adhesion Properties of Rigid Cellular Plastics Tensile Strength 14.4 psi
(parallel to rise)
ASTM D1622 Standard Test Method for Compressive Properties of Rigid Cellular Plastics Core Density 1.01 pcf
WATER
ASTM D2842 Test Method for Water Absorption of Rigid Cellular Plastics Water Absorption 6.4 % per volume
GENERAL
ASTM D2856 Standard Test Method for Open-Cell Content of Rigid Cellular Plastics by the Air Pycnometer Closed Cell Content 0.8
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

How can we help you?