DuPont™ Flashing Tape

Helps Seals Against Air and Water Intrusion Around Windows and Doors

dupont-flashing-tape-product-logo-image1.jpg

DuPont™ Flashing Tape

Helps Seals Against Air and Water Intrusion Around Windows and Doors

<br><b>DuPont™ Flashing Tape</b> is a self-adhered flashing tape with improved workability made from polypropylene film with a butyl rubber adhesive backing. Engineered to withstand the rigors of the job site. <b>DuPont™ Flashing Tape</b> helps create a durable seal against water intrusion around heads and jambs of rectangular windows and doors. <br><br> In addition to bulk water holdout, <b>DuPont™ Flashing Tape</b> can help control air leakage. Where windows and doors interface with sheathing or the DuPont™ Tyvek® Water-Resistive Barrier (WRB), DuPont™ Flashing Tape can help keep heated and cooled air in and exterior air out more effectively. <br><br> As part of a complete building envelope system, <b>DuPont™ Flashing Tape</b> can help reduce the risk of water damage, increase building comfort, and improve energy efficiency.
 
 
 
 
 
 

Features & Benefits 

 
 
 
 
 
 

Specifications

 
 
 

Standard Sizes

Unit Width Length Units per Case Cases per Pallet Units per Pallet
Roll 4 in. 75 ft. 12 18 216
Roll 6 in. 75 ft. 8 27 216
Roll 9 in. 75 ft. 4 36 144
Roll 12 in. 75 ft. 4 27 108
 
 
 

Testing

<b>DuPont™ Flashing Tape™</b> exhibits physical properties as indicated below when tested as represented. Review all instructions and (Material) Safety Data Sheet ((M)SDS) before use. Please contact DuPont at 1-833-338-7668 when additional guidance is required for writing specifications that include this product.

TEST METHOD TEST TITLE PROPERTY RESULTS
AIR
ASTM E1677 Standard Specification for Air Barrier (AB) Material or Assemblies for Low-Rise Framed Building Walls Assembly Air Leakage < 0.04 cfm/ft2
(0.2 L/s • m2)
WATER
ASTM E331 Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Uniform Static Air Pressure Difference Installed System Water Intrusion Testing. NO leakage at
300 Pa (6.24 psf)
ASTM E331 Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Uniform Static Air Pressure Difference After thermal aging (0-120°F)(Tested with no exterior cladding) NO leakage at
300 Pa (6.24 psf)
ASTM E96 Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials Water Vapor Permeability < 1 perm
(< 60 ng/Pa.sec.m2)
GENERAL
AAMA 711 Specification for Self-Adhering Flashing Used for Installation of Exterior Wall Fenestration Products Dupont Flashing Systems Products Meet the AAMA 711 Material Standard at the Highest Classification Levels Class A (no primer)
Level 3 Thermal Exposure
(80°C/176°F for 7 days)

Note:- *Tested in a wall assembly containing a window. Adhesive system is based on 100% butyl elastomer with no asphalt/modified bitumen components

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

How can we help you?