DuPont™ ArmorWall™ System

<p>A 5-in-1 exterior wall assembly</p>

Armorwall Image 1
Armorwall Image 2
Armorwall Image 3
Armorwall Image 4
Armorwall Image 5
Armorwall Image 6

DuPont™ ArmorWall™ System

<p>A 5-in-1 exterior wall assembly</p>

<p>The <b>DuPont™ ArmorWall™ System</b> is a premium, high-performance wall assembly, incorporating five traditional building enclosure elements: </p> <ul> <li>Structural Sheathing for Cladding Attachment </li> <li>Fire-Resistance</li> <li>Continuous Air Barrier</li> <li>Water-Resistive Barrier</li> <li>Low-GWP Continuous Insulation Layer.</li> </ul> <p> </p> <p>The <b>ArmorWall™ System enables multiple cladding attachment points virtually anywhere on the panel without requiring attachment back to the stud frame assembly or substrate</b>. Attaching essentially any cladding type, including brick, rainscreen assemblies, and even solar panels is no problem for ArmorWall™ thanks to its unique Magnesium Oxide (MgO) sheathing, providing exceptional strength and durability.</p>

 

Key Features & Benefits

 

  • Proven performance for 1- and 2-hour fire ratings and NFPA 285 compliance
  • Third-party verified performance featured in multiple ICC-ES Listings
  • Streamlines installation which can save time, labor and material costs
  • Enables direct attachment of claddings  without fastening back to studs
  • Features a pre-applied air and water-resistive barrier 
  • Provides high R-value of 6.5 per inch
  • Patented Fusion Technology bonds the insulation to the MgO board, preventing voids seen in products that glue or laminate their materials together
  • Certified by GreenCircle and eligible for LEED credits
  • Enables compliance with ASHRAE 90.1 continuous insulation (CI) and thermal bridging energy code requirements
  • Reduces onsite waste since weather-resistive barriers, insulation, and structural furring such as hat channels are no longer needed to be installed separately
 
 
 

 
 
 
 
 
 

Advantages of the DuPont™ ArmorWall™ System

 
 
 
 
 
 
 
 
 

Explore Assembly Details

Metal
Concrete
 
 
 
 
 
 
 
 
 

 Learn More

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

How can we help you?

 
 
 
 
 
 
问:我们可以将旧喷嘴与更新的 Froth-Pak™ 配方一起使用吗?

不可以,我们旧版本的喷嘴设计不应与新配方的无 HFC Froth-Pak™ 一起使用。

问:新的 Froth-Pak 配方具有与传统配方相同的性能吗?

与现有配方相比,这款新改进的创新解决方案可将全球变暖潜能值 (GWP) 降低 99% 以上,不含臭氧消耗化学品或 HFC,同时增强了专业承包商对 Froth-Pak™ 所期望的性能属性。Froth-Pak™ 喷涂泡沫现在已缩短了固化时间,使用正在申请专利的新应用喷嘴减少了过度喷涂,并进一步提高了其闭孔含量。

问:使用 Froth-Pak™ 绝缘材料和密封剂可以实现什么“R”值?


对于 Froth-Pak™ 密封剂,1 英寸厚的 LTTR 值(长期热阻)测量值为每英寸 5.3 ft²•h•°F/Btu(R 值)。当喷涂至 2 英寸厚时,2 英寸厚的 LTTR 值(长期热阻)测量值为每英寸 5.5 ft²•h•°F/Btu(R 值),即 2 英寸厚时为 R11.0。

对于 Froth-Pak™ 绝缘材料(在 75°F 下老化 180 天):

厚度(英寸)R 值(ASTM C518,F.ft2.h/Btu)
1.0 英寸 6.0(喷涂至 1 英寸厚时)
2.0 英寸 12.2(喷涂至 2 英寸时为 R5.6/英寸)